WELL AND SUMP PUMP TESTING

        National System: We can test pumps from anywhere in the United States as easy

                as if we are 20 miles away! With our innovative pre-paid box and label system,

                we send all the packing materials where ever they are needed and the pumps

                are shipped via UPS to us for testing!  

        Professional: Our pump test procedures were developed by engineer Chris W.

                 Korinek, P.E. and a major motor manufacturer. Reports include photos and

                 an assessment of electrical insulation, winding resistances, shaft, and 

                 operating current.

        Fast: One-week turn-around time for pump testing (based on date pump is received)

        Easy: All this testing can be set in motion from any computer any time of day. All

                 correspondence is done via email.

        Low-cost: Verbal report for non-destructive tests, if requested___________$150

                         Well pumps, 4" (w/ report*)______________________________ $200

                         Sumps pumps (w/ report*)________________________________ $250

                         Quickpickup Shipping option_______________________________ $50

                               includes box, label, instructions, all shipments, 

                               and labor. This charge is the same for pumps in the 49 contiguous

                               United States, however, there may be an additional fee if a pump is

                               sent from Alaska, Hawaii, or another country. Additional fees will 

                               be the difference of a typical domestic shipment and the new

                              shipment location. If there is an additional fee, Synergy Tech. will

                              advise the amount immediately upon receipt of the website form.

                         *Initial destructive testing, if desired, is included in pricing.

                         For a printable brochure on pump testing, click here.

       For a testimonial, Steven D. (an adjuster from a well-known Mutual Insurance Co.)

           writes, "I have been working with Synergy tech for the past year and I have 

           been very pleased with the service that I have received. It is a turn key operation

           which takes the headache out of adjusting questionable well pump claims.  The 

           ease of doing business with Synergy Tech combined with their excellent customer

           service, and fast turn around time makes them the best in the business. I would

           suggest that anyone who is considering using synergy tech to try them out as they

           will not disappoint."

Photo below is our test station with capabilities to test water flow and pressure,

    electrical current, winding and insulation resistance, and operating characteristics

1.   For the quickest pump test response, click on the form:

            Quickstart well pump analysis-online    or 

            Quickstart sump pump analysis-online 

                     based on your pump type.

2.   To get the pump to Synergy Technologies, use one of the 

      following methods:

A. Quickpickup (your best option)!!! This choice sets in motion the complete process of getting a pump sent to Synergy Technologies; it’s all done from the adjuster’s computer. No field travel is required. The steps of the Quickpickup process are as follows:

·    In the Quickstart pump analysis-online form, choose a “Quickpickup” option in the pull-down menu for pump pickup options.

·    A box, prepaid UPS shipment label (for shipment of the pump to Synergy Technologies), tape, and instructions are then sent immediately to the address specified on the online form. (To use the fax form, circle the address where the pump is located and where the box is to be sent. Fax to 262-377-1974. The above materials will then be sent.)

·    The insured or pump installer simply puts the pump in the box, tapes it together, and applies the pre-paid label to the box, per the enclosed instructions.

·    The insured or pump installer gives the package to the nearest UPS outlet -- possibly at work,  a nearby hardware store, or another UPS outlet. No expense or paperwork is required.

       B.   If Quickpickup is not used, send pump to: 

                    Synergy Technologies LLC

                    N144 W6466 Pioneer Rd.

                    Cedarburg, WI  53012

 

     Call Leslie Troedel at 262-542-0032 or Chris Korinek at 262-377-4434 to 

     discuss, if needed. 

 

Notes: 1. All payments to be by check in US Dollars. Payment is due 30 days

                 after report is emailed.

             2. If pump is to be picked up (Milwaukee metro area only), returned,

                and/or further failure analysis and/or formal test write-up are

                required, consult Synergy Technologies, for additional fees.

             3. Time spent towards subrogation efforts, after initial analysis will be

                billed at Engineering consulting rates

             4. The pump will be discarded within 30 days after email report is

                 sent, unless notification is given by client that Synergy

                 Technologies is to hold or return (additional $30 fee). Client is

                 responsible for advising if pump is to be returned to insured and 

                 for the return fees.

After the job has been entered and the box has been sent, you can track your box or pump by clicking the UPS Tracking link below and inputting either tracking number sent to you by Synergy Technologies and Mail Boxes Etc.:

http://www.ups.com/tracking/tracking.html

Contact Synergy Technologies concerning lightening damage testing or other services

Synergy Technologies Home Page